Speak with us
(02) 9984 9929
< Back

Solar Installation Quality – Rooftop Isolator Protection

February 18, 2017
On this page

Solarbank has developed a 6 point quality check to give you an idea of the smaller things we think about to ensure that your installation goes as smoothly as possible.

Point 3: Rooftop Isolator Protection

Isolators are a critical (and often overlooked) part of a solar system. Solar systems have been known to fail in many instances where a poor quality isolator was installed, an isolator was installed incorrectly or not at all!

Australian Standards

Australian Standards require solar power systems to have isolators (switches) on the roof, at the inverter and in the switchboard. This applies to both DC and AC systems. Rooftop isolators have been the source of many solar system failures primarily due to water ingress into the switch after it has deteriorated in the sun.

IMO DC Isolators

At Solarbank we only use IMO DC isolators, which are made in Austria and in our opinion are one of the best available. In addition to using the highest quality isolators we also install all rooftop isolators with a metal housing to shade the isolator and limit the exposure to the harsh Australian elements.

Here are some images to give you an idea of what a solar rooftop isolator looks like:

IMO DC isolator inside a stainless steel cover, before installation
Side view of a rooftop isolator cover with its mounting brackets
Covered DC isolator installed under solar panels on a metal roof
Rooftop isolator in its metal cover, fixed to a solar mounting rail

Quality Check: Levelling of Rails

Related articles

Related posts

Red electric car plugged into a white Tesla Wall Connector on a garage wall at dusk
Guides
How to choose a home EV charger that suits your car and works with your solar and battery, from charging speed to how much extra solar you need.
Two Solarbank installers fixing black solar panels to a tiled roof overlooking a Sydney waterway
Guides
Solar installer accreditation moved to SAA in 2024. Check three things before you sign: SAA installer, NETCC Approved Seller and CEC-approved products.
Aerial view of all-black solar panels on a metal roof with skylights
Guides
From first call to switch-on: how Solarbank designs, quotes and installs your Sydney solar and battery system, plus the support that carries on after.
get in touch

Ready to make the smart switch with us?

0 of 1000 max characters
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Explore Topics

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Sort by |
0
Results
Sort by |
Solar panels clamped to mounting rails on a concrete tile roof
Featured
Residential
All Topics
Loose DC cables under solar panels are a safety risk. How Solarbank fixes every cable to the panels and rails with stainless steel ties and clips, off the roof.
Feb 21, 2017
Category
Residential
All Topics
Seven things to sort out before you buy a solar battery: your energy use, existing panels, feed-in tariffs, components, installer, monitoring and upkeep.
Feb 21, 2017
Dektite flashing sealing a solar cable entry through the roof
Solar Energy
Guides
All Topics
A solar install should never leave you with a leaking roof. Why Solarbank seals every roof cable entry with a genuine, full-sized Dektite flashing.
Feb 20, 2017
Solar Energy
Comparisons
All Topics
Tesla Powerwall. It’s the “new age” of energy systems. Homeowners now, more than ever can take full control over their power with the Tesla Powerwall 2.
Feb 19, 2017
Featured
Comparisons
All Topics
Most roofs have a bow, and a wavy solar array is easy to spot. How Solarbank measures and string-lines every rail so the panels sit straight and level.
Feb 19, 2017
Category
Policy
All Topics
Rooftop isolators are a common cause of solar system failures. Why Solarbank fits quality IMO DC isolators under a metal cover that shades them from the sun.
Feb 18, 2017