Speak with us
(02) 9984 9929
< Back

Solar Installation Quality – Rooftop Isolator Protection

February 18, 2017
On this page

Solarbank has developed a 6 point quality check to give you an idea of the smaller things we think about to ensure that your installation goes as smoothly as possible.

Point 3: Rooftop Isolator Protection

Isolators are a critical (and often overlooked) part of a solar system. Solar systems have been known to fail in many instances where a poor quality isolator was installed, an isolator was installed incorrectly or not at all!

Australian Standards

Australian Standards require solar power systems to have isolators (switches) on the roof, at the inverter and in the switchboard. This applies to both DC and AC systems. Rooftop isolators have been the source of many solar system failures primarily due to water ingress into the switch after it has deteriorated in the sun.

IMO DC Isolators

At Solarbank we only use IMO DC isolators, which are made in Austria and in our opinion are one of the best available. In addition to using the highest quality isolators we also install all rooftop isolators with a metal housing to shade the isolator and limit the exposure to the harsh Australian elements.

Here are some images to give you an idea of what a solar rooftop isolator looks like:

IMO DC isolator inside a stainless steel cover, before installation
Side view of a rooftop isolator cover with its mounting brackets
Covered DC isolator installed under solar panels on a metal roof
Rooftop isolator in its metal cover, fixed to a solar mounting rail

Quality Check: Levelling of Rails

Related articles

Related posts

Red electric car plugged into a white Tesla Wall Connector on a garage wall at dusk
Guides
How to choose a home EV charger that suits your car and works with your solar and battery, from charging speed to how much extra solar you need.
Two Solarbank installers fixing black solar panels to a tiled roof overlooking a Sydney waterway
Guides
Solar installer accreditation moved to SAA in 2024. Check three things before you sign: SAA installer, NETCC Approved Seller and CEC-approved products.
Aerial view of all-black solar panels on a metal roof with skylights
Guides
From first call to switch-on: how Solarbank designs, quotes and installs your Sydney solar and battery system, plus the support that carries on after.
get in touch

Ready to make the smart switch with us?

0 of 1000 max characters
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Explore Topics

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Sort by |
0
Results
Sort by |
Featured
Residential
All Topics
Solar stops at sunset. Compare storing it in a home battery, selling it through a feed-in tariff, or combining both to get the most from your panels.
Apr 01, 2019
Featured
Residential
All Topics
What solar feed-in tariffs are, how they differ from rebates, what NSW retailers pay for exported solar, and when a home battery makes better use of it.
Sep 08, 2018
Featured
Guides
All Topics
Buying a solar system in Sydney? How to size it, what drives price and payback, and the common traps to avoid, from paying too little to sub-par installers.
Mar 31, 2017
Category
Residential
All Topics
Businesses use most of their power in daylight, exactly when solar produces. Why commercial solar pays off in Sydney, and what to check before choosing one.
Mar 29, 2017
Solar Energy
Residential
All Topics
Trina Solar is one of the largest solar panel manufacturers in the world. Their impressive reputation puts them ahead in just about every way.
Mar 03, 2017
Category
Guides
All Topics
Durability, performance, value and after-sales service: four things to weigh when comparing solar panels, and why a warranty is only as good as the brand.
Mar 02, 2017