Speak with us
(02) 9984 9929
< Back

Solar Installation Quality – Rooftop Isolator Protection

February 18, 2017
On this page

Solarbank has developed a 6 point quality check to give you an idea of the smaller things we think about to ensure that your installation goes as smoothly as possible.

Point 3: Rooftop Isolator Protection

Isolators are a critical (and often overlooked) part of a solar system. Solar systems have been known to fail in many instances where a poor quality isolator was installed, an isolator was installed incorrectly or not at all!

Australian Standards

Australian Standards require solar power systems to have isolators (switches) on the roof, at the inverter and in the switchboard. This applies to both DC and AC systems. Rooftop isolators have been the source of many solar system failures primarily due to water ingress into the switch after it has deteriorated in the sun.

IMO DC Isolators

At Solarbank we only use IMO DC isolators, which are made in Austria and in our opinion are one of the best available. In addition to using the highest quality isolators we also install all rooftop isolators with a metal housing to shade the isolator and limit the exposure to the harsh Australian elements.

Here are some images to give you an idea of what a solar rooftop isolator looks like:

IMO DC isolator inside a stainless steel cover, before installation
Side view of a rooftop isolator cover with its mounting brackets
Covered DC isolator installed under solar panels on a metal roof
Rooftop isolator in its metal cover, fixed to a solar mounting rail

Quality Check: Levelling of Rails

Related articles

Related posts

Red electric car plugged into a white Tesla Wall Connector on a garage wall at dusk
Guides
How to choose a home EV charger that suits your car and works with your solar and battery, from charging speed to how much extra solar you need.
Two Solarbank installers fixing black solar panels to a tiled roof overlooking a Sydney waterway
Guides
Solar installer accreditation moved to SAA in 2024. Check three things before you sign: SAA installer, NETCC Approved Seller and CEC-approved products.
Aerial view of all-black solar panels on a metal roof with skylights
Guides
From first call to switch-on: how Solarbank designs, quotes and installs your Sydney solar and battery system, plus the support that carries on after.
get in touch

Ready to make the smart switch with us?

0 of 1000 max characters
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Explore Topics

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Sort by |
0
Results
Sort by |
Tesla Powerwall 3 installed on the side of a beachside home
All-In-One
Batteries
All Topics
Tesla Powerwall 3 stores 13.5 kWh, delivers 10 kW and has a built-in solar inverter. How it beats Powerwall 2, plus a dual-Powerwall install in St Ives.
Apr 08, 2025
Products
Residential
All Topics
Solar panels and inverters vary more than the marketing suggests. What separates good products from poor ones, and why your installer should choose for you.
Aug 31, 2022
Solar Energy
Commercial
All Topics
Solar without monitoring is like driving with no gauges. Basic, inverter and advanced monitoring compared, and how Solar Analytics finds lost savings.
Aug 31, 2022
Category
Policy
All Topics
Electricity prices keep rising. Why rooftop solar cuts bills for almost every home, who saves the most, and why a cheap system often costs more in the end.
May 31, 2022
Solar Energy
Comparisons
All Topics
Solar mats, gas or a heat pump? The pros and cons of each way to heat a pool, and why a heat pump running on rooftop solar is often the cheapest to run.
Mar 01, 2022
Featured
Comparisons
All Topics
Our 2019 pick of the best solar panels for Australian conditions: Trina, LG and Q Cells, and why heat and local support matter more than global rankings.
Aug 15, 2019